FREE UK DELIVERY ON ORDERS OVER £25
FREE UK DELIVERY ON ORDERS OVER £25
We are fully booked for approx 6 months for FULL SERVICE / UPGRADE.
Working guns: If you need your gun for work/pest controlling & it needs attention sooner rather than later, we do offer an expedited "Fast Track" service at an additional charge of £50.
THANK YOU for your patience.
Is your HW100, HW101, HW110 or HW44 too low or too high on power? According to the Law, it is YOUR responsibility to ensure that your air gun is within legal power output limits. All of our services include removing the anti tamper (AT). This allows you to control the power output without having to send your gun to HC every time you have a power fluctuation, just to have them lock the Anti Tamper down again, taking away control of YOUR gun. We are authorised to service sub 12ft lb guns only.
For a full service, we won't need your stock, scope or silencer. (The stock is easily removed by just unscrewing the 2 securing bolts found underneath the stock.) We will also need a tin of your USUAL pellets - please do not send mixed weight pellets! We test & tune the power output using these pellets, we can't get accurate results if you send mixed weight pellets. We return any pellets that are remaning aftre testing. Please bear in mind: If you send heavy pellets and then switch to a lighter pellet (or vice versa) please note that this will effect the power output.
CLICK HERE for instructions on how to remove the trigger blade from the HW100BP for posting.
**DROP OFF & COLLECTION IN PERSON BY APPOINTMENT ONLY**
Sub 12ft lb, any calibre, any age, any model
Original Weihrauch HW100 & HW100Tuning Titanium Cylinders ONLY. This service covers end cap thread & valve seals (the gauge/seal involves additional work +£5). Please note: Some cylinder ends are not easy to remove, & whilst every effort is taken to ensure that there are no marks or scratches in the surface, it CAN sometimes happen & we proceed on the basis that you accept this risk. Return Shipping £9 by Special Delivery
If you are confident in your ability to take the gun apart, send us the hammer assembly and we will remove the anti tamper, replace/upgrade the hammer spring & install our Pro-Fit Hammer Spring Guide and return the unit back to you to fit yourself. Once the AT has been removed, you will be able to change the power yourself at home using a 7mm Allen Key (supplied). You can remain within legal limits without having to send your gun away each time. Return Shipping is £9 via Special Delivery.
Send us the back block & we will remove the anti tamper, replace/upgrade the hammer spring & install our Pro-Fit Hammer Spring Guide and return the unit back to you to set the power up yourself (balance the hammer spring tension & regulator pressure. Once the A.T. has been removed, you will be able to change the power yourself at home using a 7mm Allen Key (supplied). You can remain within legal limits without having to send your gun away each time. Return Shipping is £9 via Special Delivery.
Send us the gun (block, trigger, barrel) & your usual pellets, we'll remove the AT, upgrade the hammer spring & install our Pro-Fit Hammer Spring Guide. You'll be able to change the power yourself at home using a 7mm Allen Key (supplied) to enable you to remain within legal limits without having to send your gun away each time. You will need a Chorno-graph to adjust the power output yourself. HW100BP is £95 - all other HW100s £75. Return shipping via *ParcelForce is £10 or Special Delivery £17
Whilst we have your Air Cylinder or Gun for AT Removal or Service, we can swap the heavy, steel air tube for a lightweight, strong titanium air tube. This is exactly the same size & shape as the original air tube, but 45% lighter. Contact us for availability as they sell out fast.
Carbine = £120
Rifle = £135
What we do: Complete strip-down, de-grease, replace all orings, clean the barrel, remove AT (if it hasn't already been done), replace hammer & valve springs, polish the hammer, service the regulator, replace regulator springs, tune power output (12ft lb maximum), airtight test & chrono report. Please include a tin of your usual pellets for us to test and set up with, we return what we don't use. This takes 7-10 days. HW100
Return shipping via *ParcelForce is £10 or Special Delivery £17.
What we do: Everything in the Full Service above PLUS these upgrades: Pro-Fit Hammer (not suitable for MK1), Regulator Belleville Guide, hammer & valve springs, ©Regulator Test Port Seal, Fast Flow Exhaust Valve (if required, not all guns benefit from this), ©Valve Protection Spacer. Please include a FULL tin of your usual pellets for us to test and set up with, we return what we don't use. This takes 7-10 days. HW100BP £180
Return shipping via *ParcelForce is £10 or Special Delivery £17.
What we do: Full Service & Relevent Upgrades PLUS install the Titanium Cylinder with in-built "Evo" reg (sold separately). Please include a FULL tin of your usual pellets for us to test and set up with, we return what we don't use. This takes approx 10 days. HW100BP = £195
Return shipping via *ParcelForce is £10 or Special Delivery £17.
What we do: Everything in the Full Service & Upgrades PLUS install the Titanium Cylinder with in-built "Evo" reg (sold separately) including installation of the pre-chamber insert for increased shot count (not suitable for the old MK1 HW100 - they have slightly different internals). Please include a FULL tin of your usual pellets for us to test and set up with, we return what we don't use. This takes approx 10 days. HW100BP £220
Return shipping via *ParcelForce is £10 or Special Delivery £17.
Whilst we have your gun for AT Removal, Service or Upgrade, we can swap the plain cocking lever for the new style Weihrauch Biathlon Lever (& return your old cocking lever to you).
By booking a service with us, it is assumed that you have read and agree to our terms, conditions & exceptions.
Click the button below to see a short video on how to adjust the power on your HW100 once the Anti Tamper (AT) has been removed
Please always ensure that any air cylinder you post is completely drained of air and the gun is not loaded or cocked! If you do not have the air decanting tool, dry fire (without pellets) until the air is completely gone.
Royal Mail/Post Office will accept parcels with low powered (12ftlb or under) air guns / parts over the counter as long as the parcel is no more than 61cm long (Medium Parcel). You can use whichever service you prefer with as much compensation as you require (special delivery is next day delivery & you can add enhanced compensation - ie. with £1,000 cover & next day delivery costs £16.45 from 1st April 2022).
If the parcel is longer than 61cm, then it is classed as a “large” parcel and will need to go via *Parcel Force, subject to the following conditions:-
• It has to be sent on 48H, as this is not flown anywhere.
• Compensation only available for delay.
• Compensation will be prohibited for loss or damage
• Customers cannot purchase enhanced compensation
• If PO sends an air weapon on express24, it is not eligible for compensation
Please make sure that you enclose a note in the parcel with your contact details on and the following:
I CONFIRM THAT THE CONTENTS OF THIS PARCEL ARE LOW POWERED AIR WEAPON PARTS & THE AIR CYLINDER IS COMPLETELY EMPTY.
Please also put your name and return address on the outside of the parcel - this helps us to identify the parcel QUICKLY & let you know that it has arrived.
CLICK HERE for instructions on how to remove the trigger blade from your HW100BP for posting.
Drop off & collection in person is by appointment ONLY. Tuesday to Friday after 10.30am, Saturdays after 11am.
When posting your parts/gun to us, we would recommend that you use plenty of bubblewrap & a sturdy cardboard box. Give the box a shake, if you can hear anything moving about, you need more packing material inside the box to secure it - scrunched up newspaper, towels - we have even received parcels packed with teddybears, jumpers and socks! No, we won't do your laundry if you send it :-) We cannot be held responsible for guns arriving damaged due to poor packaging. When sending pellets, please ensure that the lid is sealed so they do not come loose during transit.
If you need to post your gun to us for Anti Tamper removal, Service or Upgrade, we won't need your scope, stock, magazine or silencer - unless your silencer is bonded on (MK1) or it’s on a custom fit barrel (we have plenty of standard silencers). If you prefer to leave the stock on, that's no problem.
We will need your block/trigger unit, barrel & air cylinder.
CLICK HERE for instructions on how to remove the trigger blade from your HW100BP for posting.
We will also need a tin of your usual pellets to test and set up the power output with – anything we don’t use we will return. We will need a tin of the pellets that you use REGULARLY - this enables us to fine tune the power output of your HW100 to ensure that it remains within the UK legal limit. Please bear in mind when providing pellets that the grains (weight) effects the power, eg. if you supply us with 13.43gr pellets, we will set the power output using these pellets. If you then use lighter pellets (eg. 8.44gr) you will experience a reduction in power. If you use heavier pellets, the power will increase. The pellets need to be clean, free from lubricant and it helps if it is a new, unused tin - if you send a tin of mixed weight/make pellets that you scraped out of the drawer, we cannot set the power output properly as different weight pellets will give different results and we will charge you for a new tin of our own.
Once the work is done & it is power tuned and airtight tested - we will send a secure link to an invoice, it can be paid by debit or credit card, paypal or bank transfer, whichever is easier for you.
Make sure you get everything wrapped up well in a sturdy box, bubblewrap or sponge are best for packaging, but we have had parts arrive wrapped in towels, jumpers, even socks! Make sure that the tin of pellets is sealed with tape so that it doesn't come open in transit, also pop a note in the parcel with your contact details on so that we know whose gun it is - please also mention which service(s) you require and add this to your note: I CONFIRM THAT THIS IS LOW POWERED AIR RIFLE PARTS & THE AIR CYLINDER IS EMPTY. Give the box a shake, if you can hear anything moving around, stuff some more packaging in there - even if it's just scrunched up newspaper.
If you (or anyone else) have attempted any work on the gun recently, changed any seals etc.. it's always handy to know. If there are any problems with the gun ie. it's leaking (fast or slow), power has dropped or increased, power goes up and down, please also let us know.
If you would like to get it booked in, let us know when you are ready and we will forward shipping details.
Copyright © HW100TUNING - All Rights Reserved.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data. Privacy Policy