FREE UK DELIVERY ON ORDERS OVER £25
FREE UK DELIVERY ON ORDERS OVER £25
There are quite a lot of "armchair experts" giving advice on how to remove the anti tamper from your HW110. PLEASE be very very careful when you attempt this yourself. The HW110 is not like the HW100 which can be taken apart with conventional tools - the HW110 needs custom/specialist tools to get inside the hammer assembly to remove the anti tamper or replace the hammer spring. SOME HW110's, if you are really lucky, the anti tamper just falls out (it has been known to fall out and get stuck elsewhere inside the gun!). Usually, it is locked into place.
If you have watched a video or been told to remove the anti tamper using heat - please note, if you apply heat to your hammer, your hammer spring will most likely be ruined and will need to be replaced - you cannot get access to the spring to change it without specialist tools. If you are told to "just" cut a slot across the top of the anti tamper so that you can screw it out, please note: damage to the top of the adjuster (looks like a thin skirting surrounding the anti tamper) will restrict the tension adjuster from retracting into the hammer, likewise just trying to "pinch" the anti tamper to try and pull it will damage the edge of the adjuster (see picture). The adjuster needs to be straight to retract - if it is mushroomed or mis-shapen, it may not be able to retract - the adjuster bar inside the unit is VERY thin, if you turn it too hard, it WILL snap, which means you will need to replace the whole hammer assembly (approx £65) and you are back to square 1.
If you have successfully removed the anti tamper, or it has fallen out and now your power is all over the place, this is because your adjuster is now "free spinning" and everytime you take a shot, the adjuster bar is moving slightly - so your power will be going up and down.
If you can confidently remove the hammer assembly from your HW110, send it to us to remove the AT for you - we only charge £60. If you CAN'T remove the hammer assembly but want to be able to control the power output on your HW110, just send us the gun, we will remove the AT and set your power output to approx 11.5 ft lb for you - we only charge £65 - we can even add a titanium air tube whilst we have your gun so your gun is lighter and you get more shots! We supply a professional AT removal service using the correct tools. Check our SERVICE page for more details or contact us.
Copyright © HW100TUNING - All Rights Reserved.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data. Privacy Policy