Free Shipping on UK orders when you spend over £10 - Worldwide Shipping Available
instructions, guides & how to...
Tips & Advice
Adjusting the Power on a HW100
HW100 Anti Tamper Removal
This is a collection of great tried & tested tips, tricks, guides & "how to" advice from our Service Engineers & Customers. This section will keep growing, so keep an eye on it!
HW100 Anti Tamper Removal
Adjusting the Power on a HW100
HW100 Anti Tamper Removal
A private page for AT or Overhaul Kit customers only. Ceate an account (icon at the top right of this page) & then we can grant access for you to use the "how to " guides.
Adjusting the Power on a HW100
Adjusting the Power on a HW100
Adjusting the Power on a HW100
This is a quick video guide to show you how easy it is to adjust the power on your HW100 once the Anti Tamper has been removed.
Stripping Down the HW110
Adjusting the Power on a HW110
Adjusting the Power on a HW100
This is a cracking, in-depth look at the insides of the HW110 (with pictures). The HW44 is the same - it just has a longer barrel & air cylinder.
Adjusting the Power on a HW110
Adjusting the Power on a HW110
Adjusting the Power on a HW110
This is a quick guide to show you how easy it is to adjust the power on your HW110 once the Anti Tamper has been removed.
Air Cylinder Ends Removal
Adjusting the Power on a HW110
Adjusting the Power on a HW110
It can be really tricky to get the ends off your Weihrauch Air Cylinder to service it without marking the cylinder - this guide shows how to use our Ends Removal Tools safely.
Fix an Air Leak Down the Barrel
Fix an Air Leak Down the Barrel
Fix an Air Leak Down the Barrel
This leak usually happens once you have had the regulator block apart - the fix is to polish the exhaust valve cover and then re-seat the exhaust valve to the polished cover/insert.
Regulator Pressure Test Port
Fix an Air Leak Down the Barrel
Fix an Air Leak Down the Barrel
Never get your ball bearing stuck again! Here's how to fit our upgraded ©Regulator Pressure Gauge Test Port Seal Kit using a 3mm allen key to screw it into place.
Setting the HUMA & HWT Reg
Fix an Air Leak Down the Barrel
Replace the Exhaust Valve/Spring
If you have one of our 250bar Titanium Cylinders with in-tube regulator, here's how to set the regulator.
Replace the Exhaust Valve/Spring
Replace the Exhaust Valve/Spring
Replace the Exhaust Valve/Spring
A step-by-step guide on how to replace the Exhaust Valve and/or spring and o-ring seal no. 2658.
HW100 Exploded Diagram
Replace the Exhaust Valve/Spring
MK1 HW100 Exploded Diagram
Here is a good close up diagram of the inside of the MK2 / MK3 HW100. All of the seals we provide in our seal kit are marked in red.
MK1 HW100 Exploded Diagram
Replace the Exhaust Valve/Spring
MK1 HW100 Exploded Diagram
Here is a good close up diagram of the inside of the MK1 HW100. All of the seals we provide in our seal kit are marked in red.
HW100 User Manual
HW100 User Manual
HW100 User Manual
View a PDF Weihrauch User Manual for the HW100
HW110 User Manual
HW100 User Manual
HW100 User Manual
View a PDF Weihrauch User Manual for the HW110
WARNING
- You are responsible, as the owner, to keep your air rifle running UNDER the 12fpe UK legal limit unless you hold a valid FAC.
- Carrying out modifications to your Air Rifle may void any warranty you have, proceed at your own risk.
- If you are unsure of your capability to carry out ANY modifications, please contact us or your local gunsmith.
FREE SUPPORT
We understand that it can be frustrating when your beloved air rifle isn't working as it should - whether you need it for work or for play. We spend a lot of time offering free support - and are happy to do so - but if you want to send us £1 (or whatever, it's entirely up to you) to say "thankyou" we are always most grateful...
