Quality parts, upgrades & servicing for HW100, HW110 & HW44 by HW100Tuning

250bar Titanium Air Cylinders for the Weihrauch HW100

Originally designed by our own team, HWTuning pioneered the idea of housing a regulator inside the air cylinder end cap to increase shot count and improve performance. Our itanium cylinders are a lightweight, strong & safe replacement for your original stainless steel cylinder, providing a much better balance to the handling & overall feel of your gun - and with our 250bar cylinders, you will get a minimum of 75% increase in shot count too. Easy to fit - just screw the cylinder onto your gun & fill to 250bar. It is recommended that the Anti Tamper is removed from your gun so that the power can be adjusted should you need to.

Much safer than aluminium, you can fill our cylinders to 250bar with confidence. Safety tested: in-house to 300bar, hydro-tested to 700bar and independently tested to 500bar.

SIZES: (From the block to the end of the cylinder)

Carbine (231mm), Rifle (331mm), XL/FAC (421mm)

PRICES: Carbine = £290 Rifle = £310 XL/FAC = £340

Safe to fill to 250bar (the cylinder end cap hold it's own regulator).
You do not need to remove the original in-block regulator or drill any holes!
Suitable for FAC and sub 12 ft/lb guns.
Includes on-board Manometer/Gauge (0-300bar).
Upgrade your MK1 HW100 to a quick fill.
Cylinder can be filled using the standard HW100 quick fill probe.
Approx 45% lighter than the original steel tube - improves the overall weight & balance.
Increase in shot count with superb consistency (75% to 150% more shots depending on Carbine/Rifle & Calibre).
Spare service seals are included.
Dust Plug included.
Profiled to match the original HW100 cylinder so that the shoulder on the cylinder will match your barrel band.
You CANNOT take this cylinder on and off your gun whilst pressurised, it MUST be completely emptied first.
Easy to fit - just screw the cylinder onto your gun & fill to 250bar. It is recommended that the Anti Tamper is removed from your gun so that the power can be adjusted should you need to.

TYPICAL SHOT COUNT RESULTS (sub 12 ft lb):-

Carbine .177 with Original 200bar Cylinder from factory = 3.5 mags (50 shots)
Carbine .177 with 250bar Titanium Cylinder = 6 to 8 mags (80 - 112 shots)

Carbine .22 with Original 200bar Cylinder from factory = 5.3 mags (75 shots)
Carbine .22 with 250bar Titanium Cylinder = 9 to 11 mags (126 - 150 shots)

Rifle .177 with Original 200bar Cylinder = 7 to 7.85 mags (98 to 110 shots)
Rifle .177 with 250bar Titanium Cylinder = 15 mags (210 shots)

Carbine = £290 Rifle = £310 XL/FAC = £340

As recommended by Weihrauch:-

(1) NEVER put oil or grease of any kind on the threads. (Titanium does not react the same as steel).
(2) Use "Divers air quality only" to fill your air cylinder - this is because it has a VERY small moisture content, you can only get this quality air from a dive bottle. Most pumps can only guarantee to provide air that is 90% moisture free - even with a dry pack filter attached.

NEVER remove the 250bar fill cylinder from your gun whilst pressurised. You must remove ALL of the air first.

Quality parts, upgrades & servicing for HW100, HW110 & HW44 by HW100Tuning

250bar Titanium Air Cylinders for the Weihrauch HW100

GET ON THE WAITING LIST!